What does the scale above mean to you as a skier or snowboarder in the Gulmarg backcountry? Remember, this advisory is for the Gulmarg backcountry, which means the terrain that is outside of Gulmarg Ski Area. The red areas in the photo below are the Gulmarg backcountry, and the green area is Gulmarg Ski Area. This advisory does not apply to the green zone ski area. Read more here.

Snowpack Discussion

Avalanche danger above 3000 meters is High (4) today as additional snow accumulates. Natural avalanches likely, human triggered avalanches very likely. At Treeline (3000m) and below, the avalanche danger is Considerable (3). Natural avalanches are possible, human triggered avalanches are likely.  The #1 avalanche problem for today is Storm Slab above 3000 meters.  We have a building cohesive layer of snow (a slab) sitting on top of the old snow surface. There is a poor bond between the old snow surface and the new Storm slab.  See the avalanche problems section below to read more about this avalanche problem. The #2 avalanche problem for today is Dry Loose avalanches. Dry loose avalanches can be expected at all elevations and on all aspects within the new storm snow. Avoid travel beneath the bowls of Mount Apharwat today. Be careful around roofs in Gulmarg, they are likely to avalanche.  If you choose to go in the backcountry today, choose densely forested areas and ski very low slope angles. Ski and snowboard in groups. Do not ski alone. Dangerous avalanche conditions at all elevations and aspects today.

http://www.deepsnowsafety.org/index.php/. We now have enough snow in the conifer forests for skiers and riders to get trapped in tree wells. Read more about this phenomenon in the link above. It causes several fatalities each year in other ski regions of the globe.

https://avanet.avatech.com/

---

Avalanche Problem #1 – Storm Slab

Release of a soft cohesive layer (a slab) of new snow that breaks within the storm snow or on the old snow surface. Storm-slab problems typically last between a few hours and few days. Storm-slabs that form over a persistent weak layer (surface hoar, depth hoar, or near-surface facets) may be termed Persistent Slabs or may develop into Persistent Slabs.

You can reduce your risk from Storm Slabs by waiting a day or two after a storm before venturing into steep terrain. Storm slabs are most dangerous on slopes with terrain traps, such as timber, gullies, over cliffs, or terrain features that make it difficult for a rider to escape off the side.

Avalanche Problem #2 – Dry Loose

Release of dry unconsolidated snow. These avalanches typically occur within layers of soft snow near the surface of the snowpack. Loose-dry avalanches start at a point and entrain snow as they move downhill, forming a fan-shaped avalanche. Other names for loose-dry avalanches include point-release avalanches or sluffs. Loose-dry avalanches can trigger slab avalanches that break into deeper snow layers.

Loose Dry avalanches are usually relatively harmless to people. They can be hazardous if you are caught and carried into or over a terrain trap (e.g. gully, rocks, dense timber, cliff, crevasse) or down a long slope. Avoid traveling in or above terrain traps when Loose Dry avalanches are likely.

Weather Forecast (link:http://www.snow-forecast.com/resorts/Gulmarg/6day/mid)